Delta

A, AD Type

Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a pumping unit integrated in a cast iron housing, connected to an aluminium pressure die casting distributor. It is provided with bidirectional nozzle ports, pressure […]

VU Type

The DELTA Universal Fuel Unit is an efficient and modern oil pump, designed for pumping oil in high pressure oil burners and transfer pump applications. The mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), and the same unit is provided with bilateral nozzle port, and is suitable for clockwise and […]

VD Type

The DELTA VD fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can be fitted to every oil burner. The DELTA fuel unit type VD is designed for pumping oil in high pressure oil burners […]

VM Type

The DELTA VM fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can be fitted to every oil burner. The DELTA fuel unit type VM is designed for pumping oil in high pressure oil burners […]

EV-F84 type

The Delta type EV electrical solenoid valve is a normally closed one-way direct acting valve. It is designed for use as an interrupter valve or as a shut-off valve. The body is made of brass, the core is of solenoid quality steel and the seal is a synthetic rubber which is suitable for use with light […]

Chemical Industry

Pump for dosing and mixing of aggressive chemical substances. – Capacity 60 Kg/h @ 1400 RPM – Pressure 10-40 bar – Fluid viscosity 8800 cps

Hydraulic Operators

Tranfer oil pump fitted into hydraulic operators for swing-leaf gates. – Capacity 20-70 L/h @2800 rpm – Pressure 10-40 bar – Temperature -20°C/+80°C

Automotive Heating

Fuel oil pump integrated into a small water heater for motor vehicles – Heating capacity 24-35 kW – Electric motor 24 VDC – Temperature -40°C/+85°C – Integrated solenoid valve – Pre-heated nozzle holder

Military Applications

Low pressure fuel pump fitted in a special oil burner designed for U.S. Army. – Heating capacity 8.8-23.5 kW – Less than 10 ppm CO – Temperature -15°C/+60°C – Self priming, high lift, single line